Sonotec SONOFLOW CO.55/100 Non-Invasive Ultrasonic Flow Rate Sensor; Tube OD 11.1 mm - 12.0 mm Stainless Display

Non-Invasive Ultrasonic Flow Rate Sensor; Tube OD 11.1 mm - 12.0 mm
Sensor Model: 
Stainless Display
Sensor Series Family: 
Sonotec SONOFLOW CO.55/100
Applicable Industries: 
Biotech
Food and Beverage

The Stainless Display version offers a digital flow rate display for visual flow confirmation, manual flow rate adjustments, etc. This can be helpful for monitoring applications where the sensor is not connected to PLC. This sensor utilizes a stainless steel housing.
The 100 series sensor is designed for tube size:

Outer Diameter (OD): ~11.1 - 12.0 mm (7/16").
Suggested Inner Diameter (ID): 6.4 - 9.0 mm

Tube #: LS18 & LS24

Measuring method: Ultrasound, two sections of measurements, dry coupling, no couplant required

Calibration: Sensors can be pre-calibrated by A&P Calibrations with NIST traceable certifiability. Calibration can be accomplished by the end user as well.

Interfaces:
Current output for flow rate: 4 - 20 mA
Frequency output for flow rate: 0 - 20 kHz, 5 V digital
RS485 interface: bus-capable
Switching output: configurable as PNP / NPN / Push-Pull, 0 … 30 V

Mounting: Fixed installation: 4 fixing holes M4, 8 mm deep

Media: Acoustically transparent liquids

Sensor materials: Measuring channel: PMMA black

Housing: Stainless steel, plastics

Operating voltage: 12 ... 30 VDC, maximum ripple 10 %, protection against reverse-polarity

Current consumption: Maximum 30 mA (with open current, frequency and switching output)

Electrical connection: 8-pin M12 Connector, DIN EN 61076-2-101:2012

Shielding: Required: via cable / housing (mounting screws)

Sonoflow 100 flow rate meters are available in ALUMINUM, STAINLESS, or STAINLESS with integrated DISPLAY.